Non-Toxic, 100 Percent Virgin Material

Non-Toxic, 100 Percent Virgin Material

Sensor Connects to Indoor Units

Onboard LED Indicator Can be Mounted to Side of Unit

For Installation Directly on Primary Drain Pan or Clipped to Coils above Primary Drain Pan

Electronic Condensate Drain Sensor Specifically Developed for Mitsubishi Electric Cooling and Heating Residential and Commercial Ductless Mini-Split Systems with Exclusive Mitsubishi Electric Wire Harness Connectors

Eliminates the Need for a Second, Unsightly Drain Pan

Meets International Building Codes

Less Expensive Option Compared to a Condensate Pump

Can also be Installed as a Backup System to a Condensate Pump Failure

Clean and Professional Internal Installation

Audible Alarm

Up to 10 Second Make/Break Delay

Automatic Reset

Quick-And-Easy Installation

Low Battery Audible Alert

Integral Feet Raise the Hydrophilic Pad and Sensor Array Off the Drain Pan Slightly to Prevent Nuisance Tripping and Pan Corrosion (Metal Pans Only) from Interfering with the Sensor Array

Hydrophilic Pad a High Tech Polymeric Fiber Quickly Draws Water into the Sensor Array Using Proven Capillary Technology

Multiple Unit Connectivity Allows for Multiple Wet Switches to be Connected in Series to Adequately Cover Large Drain Pan Areas

Power Supply to the Wet Switch® is 24 Volt AV, the Standard Power Available on Most Air Handler Units, this Makes Hookup Quick and Easy

There is No Need to Run Different Power to the Switch

The Double Throw Relay Allows for Wiring to Interrupt the System and to Sound an Alarm (By Others) when Moisture is Detected

Stainless Steel Sensor Array a High Tech Array of Multiple Stainless Steel Sensors Detects Even a Minimal Amount of Water Drawn into the Hydrophilic Pad

Proven Electronics Prevent Mechanical Failure in an Aggressive Operating Environment

Push to Reset when the Wet Switch® Activates, it Locks Out the Call for Cool Circuit on the Air Conditioner Until the Switch is Manually Reset

This Prevents Continuing Damage in Cases where the Overflow Water Drains Out of the Pan, Onto the Surrounding Ceiling

Push to Test the Push to Test Button on Wet Switch® Gives the Installer a Quick, Easy Way to Test the Wiring on their Installation

Giving You the Confidence the Switch will Work as Designed, when Needed

Compact Package

Condensate Cop is a Unique Clamp-On Float Switch Intended for HVAC Drain Pan Installation

Large Over-Clamping Area that Fits Easily Over the Edge of all Types of Drain Pan

Including Formed Plastic and Galvanized Sheet Metal

Separate Float/Probe Assembly Swivel to Accommodate Drain Pan having Sloped Sides

Swivel Action Allows the Installer to Position the Float Switch for Best Operation and then Clamp it into Place

Probe Features an Inlet Grill which Prevents the Float from Being Blocked or Damaged by Insulation or Other Debris

2-Wire Connection for Easy Hook up to a Thermostat

Simple to Install - Install in Just Minutes in the Primary or Auxiliary Drain Line

They are also Quick and Easy to Access if Service is Required

Reliable Operation Switches Use Proven Magnetic Reed Switch Technology to Ensure Proper Operation and Prevent Costly Problem

Diversitech Flood Prevention Switch Installs in Just Minutes in the Primary or Auxiliary Drain Line

They are also Quick and Easy to Access if Service is Required

The Flood Prevention Switch May be Installed Horizontally or Vertically Depending on the Location and Positioning of the Drain Line

This Makes Installation Faster and Easier

These Switches Use Proven Magnetic Reed Switch Technology to Ensure Proper Operation and Prevent Costly Problems

Diversitech Flood Prevention Switches Shut Off the System when Water Backs up in the Drain Line Due to a Clogged Line

This Prevents Costly Damage to Equipment, Floors, Walls and Ceiling