Lead-Free

Designed for Use with Aluminum and Copper Tubing. Not Recommended for Steel Tubing

Little to No Tube Preparation Required. Connection Does Not Require Flaring, Soldering, or Other Types of Tube Preparation

Plastic and Pex Tubing Installations Require Sleeves and/or Inserts. Check Installation Instructions for Exact Requirements

Lead-Free

Made in USA

Brass Construction Provides Strength, Durability and Longer-Lasting Performance

Designed for Use with Aluminum and Copper Tubing. Not Recommended for Steel Tubing

Designed for Use with Potable and Non-Potable Water, Instrumentation, Hydraulic and Pneumatic Systems

Compression Fittings Do Not Require Flaring, Soldering, or Other Types of Tube Preparation

Lead-Free

Designed for Use with Aluminum and Copper Tubing. Not Recommended for Steel Tubing

Little to No Tube Preparation Required. Connection Does Not Require Flaring, Soldering, or Other Types of Tube Preparation

Plastic and Pex Tubing Installations Require Sleeves and/or Inserts. Check Installation Instructions for Exact Requirements

Lead-Free

Lead-Free

Designed for Use with Aluminum and Copper Tubing. Not Recommended for Steel Tubing

Little to No Tube Preparation Required. Connection Does Not Require Flaring, Soldering, or Other Types of Tube Preparation

Plastic and Pex Tubing Installations Require Sleeves and/or Inserts. Check Installation Instructions for Exact Requirements

Lead-Free

Made in USA

Designed for Use with Aluminum, Copper, Brass and Welded Steel Tubing that Can be Flared

Designed for Use with Fuel, Oil, Liquefied Petroleum and Natural Gas Line

Resists Mechanical Pullout

May be Used in Both Indoor and Outdoor

Made in USA

Designed for Use with Aluminum, Copper, Brass and Welded Steel Tubing that Can be Flared

Designed for Use with Fuel, Oil, Liquefied Petroleum and Natural Gas Lines

Resists Mechanical Pullout

May be Used in Both Indoor and Outdoor

Made in USA

Designed for Use with Aluminum and Copper Tubing. Not Recommended for Steel Tubing

Little to No Tube Preparation Required. Connection Does Not Require Flaring, Soldering, or Other Types of Tube Preparation

Plastic and Pex Tubing Installations Require Sleeves and/or Inserts. Check Installation Instructions for Exact Requirements

Lead-Free

Made in USA

Lead-Free

One-Piece Brass Body Provides Strength, Durability and Longer-Lasting Performance

Designed for Use with Aluminum and Copper Tubing. Not Recommended for Steel Tubing

Designed for Use with Potable and Non-Potable Water, Instrumentation, Hydraulic and Pneumatic Systems

Little to No Tube Preparation Required. Connection Does Not Require Flaring, Soldering, or Other Types of Tube Preparation

Plastic and Pex Tubing Installations Require Sleeves and/or Inserts. Check Installation Instructions for Exact Requirements

Lead-Free

Made in USA

Designed for Use with Aluminum, Copper and Plastic Tubing. Plastic Tubing Requires NPT Insert and OPT Sleeve. Not Intended for Steel Tubing

Designed for Use with Potable and Non-Potable Water, Instrumentation, Hydraulic and Pneumatic Systems

Little to No Tube Preparation Required. Connection Does Not Require Flaring, Soldering, or Other Types of Tube Preparation

Plastic and Pex Tubing Installations Require Sleeves and/or Inserts

Lead-Free

Made in USA

Designed for Use with Aluminum, Copper, Brass and Welded Steel Tubing that Can be Flared

Designed for Use with Fuel, Oil, Liquefied Petroleum and Natural Gas Lines

Recommended for Higher Pressures than those Covered by Compression Fittings

Resist Mechanical Pull Out

Made in USA

Designed for Use with Aluminum, Copper, Brass and Welded Steel Tubing that Can be Flared

Designed for Use with Fuel, Oil, Liquefied Petroleum and Natural Gas Line

Recommended for Higher Pressures than those Covered by Compression Fittings

Resist Mechanical Pull Out

Made in USA

Fabricated from Brass Forgings or Drawn Brass Rod Eliminating the Possibility of Seepage by Porosity

Accurately Machined and Fully Protected against Damage During Shipping, Handling and Storage to Assure Tight LeakProof Joints

Smooth Interior Finish Provides Unrestricted Flow and Reduced Pressure Drop

RoHS Compliant

Designed for Use with Aluminum, Copper, Brass and Welded Steel Tubing that Can be Flared

Designed for Use with Fuel, Oil, Liquefied Petroleum and Natural Gas Lines

Recommended for Higher Pressures than those Covered by Compression Fittings

Resist Mechanical Pull Out

Made in USA

Designed for Use with Aluminum, Copper, Brass and Welded Steel Tubing that Can be Flared

Designed for Use with Fuel, Oil, Liquefied Petroleum and Natural Gas Lines

Recommended for Higher Pressures than those Covered by Compression Fittings

Resist Mechanical Pull Out

Made in USA

Designed for Use with Aluminum, Copper, Brass and Welded Steel Tubing that Can be Flared

Designed for Use with Fuel, Oil, Liquefied Petroleum (LP) and Natural Gas Lines. May be Used in Potable Water Applications

Recommended for Higher Pressures than those Covered by Compression Fittings

Resists Mechanical Pullout

May be Used in Both Indoors and Outdoors

Made in USA

Designed for Use with Aluminum, Copper, Brass and Welded Steel Tubing that Can be Flared

Designed for Use with Fuel, Oil, Liquefied Petroleum and Natural Gas Lines

Recommended for Higher Pressures than those Covered by Compression Fittings

Resist Mechanical Pull Out

Made in USA

Designed for Use with Aluminum and Copper Tubing. Not Recommended for Steel Tubing

Little to No Tube Preparation Required. Connection Does Not Require Flaring, Soldering, or Other Types of Tube Preparation

Plastic and Pex Tubing Installations Require Sleeves and/or Inserts

Made in USA

Designed for Use with Aluminum and Copper Tubing. Not Recommended for Steel Tubing

Little to No Tube Preparation Required. Connection Does Not Require Flaring, Soldering, or Other Types of Tube Preparation

Plastic and Pex Tubing Installations Require Sleeves and/or Inserts

Made in USA

Brass Construction Provides Strength, Durability and Longer-Lasting Performance

Designed for Use with Aluminum and Copper Tubing. Not Recommended for Steel Tubing

Designed for Use with Potable and Non-Potable Water, Instrumentation, Hydraulic and Pneumatic Systems

Compression Fittings Do Not Require Flaring, Soldering, or Other Types of Tube Preparation

Lead-Free

Lead-Free

Designed for Use with Aluminum, Copper, Brass and Welded Steel Tubing that Can be Flared

Designed for Use with Fuel, Oil, Liquefied Petroleum and Natural Gas Line

Recommended for Higher Pressures than those Covered by Compression Fittings

Resists Mechanical Pullout

For Indoor Use

Lead-Free

Made in USA

Made in USA

ProLine Series Ball Valves are Precisely Engineered for Outstanding Service, Long Life and Reliable Performance

These Valves Offer Convenient Operation, Superior Flow

One-Piece Body for Leak Resistance and Long Valve Life

Coated Aluminum Handle for Corrosion and Solvent Resistance

Designed for Use with Aluminum and Copper Tubing. Not Recommended for Steel Tubing

Little to No Tube Preparation Required. Connection Does Not Require Flaring, Soldering, or Other Types of Tube Preparation

Plastic and Pex Tubing Installations Require Sleeves and/or Inserts

Made in USA

Designed for Use with Aluminum and Copper Tubing. Not Recommended for Steel Tubing

Little to No Tube Preparation Required. Connection Does Not Require Flaring, Soldering, or Other Types of Tube Preparation

Plastic and Pex Tubing Installations Require Sleeves and/or Inserts

Made in USA