Hard Plastic Panel with an Elastomeric Collar that Seals Around the Pipe

Won't Fade, Crack or Rust

Designed with a Tear Out Collar to Accommodate Pipe Size Use from 1/2 Inch to 2-1/2 Inch or 3 Inch to 6 Inch

Hard Plastic Panel with an Elastomeric Collar that Seals Around the Pipe

Won't Fade, Crack or Rust

Designed with a Tear Out Collar to Accommodate Pipe Size Use from 1/2 Inch to 2-1/2 Inch or 3 Inch to 6 Inch

Use as a Protective Water Shield (Slides Down Over Pipe)

No Caulking Needed

Do Not Use Petroleum Based Products on Rubber Collars

Non-Fading Collar Material

Use as a Protective Water Shield

No Caulking Needed

Do Not Use Petroleum Based Products on Rubber Collars

Non-Fading Collar Material

Roof Penetration Around the Plumbing Vent Pipe

Rated 180 Deg F Continuous Heat and Approved for Type B Installations

Self-Sealing Collar Slides Over Pipe and Requires No Caulking

Do Not Use Petroleum Based Products or Paint on Flashing Collar or Plastic Base

Not for Hot-Mopped or Built-Up Roofs

Patented All-Flash Design Allows Use on Multiple Pipe Sizes

Rated 180 Deg F Continuous Heat and Approved for Type B Installations

Self-Sealing Collar Slides Over Pipe and Requires No Caulking

Do Not Use Petroleum Based Products or Paint on Flashing Collar or Plastic Base

Not for Hot-Mopped or Built-Up Roofs

Roof Penetration Around the Plumbing Vent Pipe

Rated 180 Deg F Continuous Heat and Approved for Type B Installations

Self-Sealing Collar Slides Over Pipe and Requires No Caulking

Do Not Use Petroleum Based Products or Paint on Flashing Collar or Plastic Base

Not for Hot-Mopped or Built-Up Roofs

Roof Flashing Slides Over Vent Pipe and Conforms to any Roof Pitch

Use Silicone Sealant Between Base and Surface and Secure with Sheet Metal Screws

Non-Fading EPDM Collar

Rated 212 Deg F Continuous Heat

Approved for Type B Installations

Ideal for Corrugated Metal Roofs

Ozone and UV Resistant

Pleated Cone Adjusts to any Pitch

Made in USA

Patented All Flash Collar has Tear Away Ring Allowing Flashing to Seal Various Pipe Diameters

Non-Fading, Non-Cracking Rigid Black Thermoplastic Base

Non-Fading Sealing Collar

Approved for Type B Installation

Do Not Use Paint or Petroleum Based Products on Plastic Bases or Rubber Collars

Roof Flashing Slides Over DWV Pipe for Pitch to 60 Degree

All-Flash Collar has Tear-Away Ring Allowing Flashing to Seal Various Pipe Diameter

Non-Fading, Non-Cracking Rigid Black Thermoplastic Base

Non-Fading Sealing Collar

Approved for Type B Installation

Not for Hot-Mopped or Built-Up Roofs

Do Not Use Paint or Petroleum Based Products on Plastic Bases or Rubber Collars

Flashings are Engineered for Profiled Roofing Materials and Can be Installed All Type Roofing Surfaces, Including Metal, Plastic, Tile, Rubber Membrane and Others

The Base is Designed to form a Seal on any Panel Configuration

Flashings are Engineered for Profiled Roofing Materials and Can be Installed All Type Roofing Surfaces, Including Metal, Plastic, Tile, Rubber Membrane and Others

The Base is Designed to form a Seal on any Panel Configuration

Flashings are Engineered for Profiled Roofing Materials and Can be Installed All Type Roofing Surfaces, Including Metal, Plastic, Tile, Rubber Membrane and Others

The Base is Designed to Form a Seal on any Panel Configuration

Master Flash is Pliable So it Won't Crack or Break

Approved for Type B Installations

Furnish and Install the Portals Plus Standard Alumi-Flash at All Points Where up to Two Pipes 0.375 to 1 Inch and up to Two Pipes 1 to 2 Inch Diameter are Penetrating the Roof

Patented All-Flash Design Allows Use on Multiple Pipe Sizes

Rated 180 Deg F Continuous Heat and Approved for Type B Installations

Self-Sealing Collar Slides Over Pipe and Requires No Caulking

Do Not Use Petroleum Based Products or Paint on Flashing Collar or Plastic Base

Not for Hot-Mopped or Built-Up Roofs

Roof Flashing Slides Over Vent Pipe for Pitch to 45 Degree

Non-Fading, Non-Cracking Rigid Black Thermoplastic Base

Non-Fading Sealing Collar

Approved for Type B Installations

Not for Hot-Mopped or Built-Up Roofs