Functions Check Voltage, Check Amperage, Test Continuity, Test Capacitance, Test Diodes, Test Resistance

Silicone Test Leads Deliver Better Performance in Temperature Extremes than Test Leads Insulated with Vinyl

The ADK7 Deluxe Silicone Lead is the Optimal Way to Test most Electrical Parameters You Run into During Field Service

The ATB1, K-Type Bead Thermocouple is Used to Take Temperatures of Air, Surfaces or Liquids up to 400 Deg F

Use the ATB1 for Outdoor Dry Bulb Temperatures When Finding Target Superheat

The ATB1 Can be Used with any of Our Meters that Measure Temperature and any Thermometer Accepting a K-Type Thermocouple

The Wrap-Tab Allows the Thermocouple Wire to Conveniently Store on the Plug

Just Wrap the Excess Wire Around the Wrap-Tab and Feed it through One of the Eye

Measures Duct Pressure to Balance Air Flow

Works with any Fieldpiece Expandable Instrument or Handle or any DMM with MVDC Ranges

Measure Gas Pressure on 3/16 Inch and 5/16 Inch Regulator Port

Enough Resolution and Sensitivity to Measure Static Pressure

Zero Set on Face of Instrument

Auto-Power Off (APO) for Data Logging Pressure

Low Battery LED Indicator

Connects Directly to any Fieldpiece Stick Meter

Measures Temperature and Relative Humidity Percentage

Calculates Wet Bulb and Dew Point Temperatures

Log Relative Humidity Over Time to Help Troubleshoot System

Measures Percent O2 and Flue Gas Temperature

Calculates Percent CO2

Natural Gas and Oil #2

Stable LED