Prevents Ice from Building up on the Outdoor Unit Base When Operating in Heating Mode for an Extended Period of Time in a Very Low Temperature, High Humidity Condition

Controlled by Outdoor Unit

Works During Defrost Operation and Energizes When Outdoor Temperature Drops below 36 Deg F

Function Lockout Individually Prohibits All Functions of Each Remote Controller

Supports Both Fahrenheit and Celsius

Controls Group Operation for up to 16 Indoor Units in a Single Group

Maximum Signal Receiving Distance is Approximately 22 Foot

Maximum Signal Receiving Angle is Approximately 45 to the Left and Right of Center

Standard P-Series Units Provide Full Capacity Down to 23 Deg F

Standard PUZ Heat Pump Outdoor Units Provide Full Cooling Capacity Down to 23 Deg F Outside Ambient

Centralized Controller

System Control Interface

Prevents Ice from Building up on the Outdoor Unit Base When Operating in Heating Mode for an Extended Period of Time in a Very Low Temperature, High Humidity Condition

Controlled by Outdoor Unit

Works During Defrost Operation and Energizes When Outdoor Temperature Drops below 36 Deg F

Microprocessor Based Electronic Temperature Control with a Built-In Non-Volatile Eprom to Retain Settings Even after a Power Outage

Remote Sensor that Can be Spliced for Sensing up to 400 Foot with 22 AWG Wire

Simple Keypad Programming of Set Point Temperature, Differential

LCD Readout of Sensor Temperature, Control Settings, Relay Status and Onboard Diagnostics

Lockout Switch to Prevent Tampering by Unauthorized Personnel

Allows for a Mitsubishi Electric Indoor Unit to Communicate with to the Kumo Cloud App and Web Service

Wireless Connection over Local Network

Connection to Indoor Unit via CN105

WPS Button to Pair with Wireless Router

Reset Button to Reset All Settings

3-LEDS to Display Device Status

RF Channel

AES Encryption

PSK Authentication

Prevents Ice from Building up on the Outdoor Unit Base When Operating in Heating Mode for an Extended Period of Time in a Very Low Temperature, High Humidity Condition

Controlled by Outdoor Unit

Works During Defrost Operation and Energizes When Outdoor Temperature Drops below 36 Deg F

Allow for a Mitsubishi Electric Indoor Unit to be Controlled Remotely or Locally with to the Kumo Cloud App

Wireless Connection Over a Local Network

Mode Button to Enter Bluetooth Configuration to Pair with Local Wireless Network

Reset Button to Reset All Setting on Wireless Interface

Front Wind Baffle Allow Outdoor Unit to Operate at Full Capacity Down to the Temperature Range Shown in the Table Above

Prevent Wind from Reversing Outdoor Fan Rotation when Unenergized

Durable and Low Maintenance Construction

Automatic Return to Preset Temperature Setpoint if Set Point is Changed from the Remote Controller after a Preset Time Range

Energy-Saving Operation Schedule

Night Setback

Main Display

Backlight Display

Filter Maintenance Notification

Error Code Notification

Front Wind Baffle Allow Outdoor Unit to Operate at Full Capacity Down to the Temperature Range Shown in the Table Above

Prevent Wind from Reversing Outdoor Fan Rotation when Unenergized

Durable and Low Maintenance Construction

Field Capability to Set Up Points and Troubleshooting Codes on the VFD Controller

Standard P-Series Units Provide Full Capacity Down to 23 Deg F

Standard PUZ Heat Pump Outdoor Units Provide Full Cooling Capacity Down to 23 Deg F Outside Ambient